News

Large-Dimension BR fittings mean success for your pipework projects

Space-saving, pressure-class rated and dimensionally stable: the list of advantages offered by injected moulded PE fittings in large diameters is long.

For many years Bänninger Kunststoff Produkte GmbH has been producing a wide range of large PE injection-moulded fittings with diameters of up to 630 mm in pressure classes SDR 11 and SDR 17, both in short and long variations. BR fittings are certified in accordance with DVGW, OEVGW, IIP and INSTACERT and are well suited for both butt-welding and electrofusion socket welding connections.

In comparison to pressed pipe bends, segmented bends, extended short bends and lathed elbows, BR’s large PE fittings provide a more economical solution for your construction plans. Even in the planning stage, architects can count on the high quality standards that can be achieved with our fittings for numerous applications. Whether it’s for the transport of drinking water or gas, whether it’s for the chemicals industry or for waste water treatment, BR’s large PE fittings are approved for the same pressure class as the pipes that they connect, without a pressure-reduction factor. This ensures that the performance of the entire piping system is optimally used. Furthermore, all Bänninger 90° PE elbows with a diameter of 355 mm or more are rounded on the inner radius. This quality advantage of BR solutions provides for optimal flow properties.

For special requirements, BR offers prefabricated assemblies consisting of PE fittings. Customer specifications are carried out at our own production locations by qualified specialists. Upon request the assemblies can be punctually delivered ready-to-install directly to the construction site by longstanding partner companies.

BR’s wide range of more than 100 variations of fittings in large dimensions also cut a fine figure when it comes to transport and storing. The compact size of the fittings halves weight and space in transit and in storage. That saves freight costs, storage space and facilitates handling at the construction site. In its finished condition the first-class material that is used during the „Made-in-Germany“ production process is free of internal stress and thus permits a dimensionally stable storage of the fittings, even over long periods of time and when exposed to heat. In particular, in comparison to pipe bends, customers benefit from the dimensional stability of BR elbows. Strict tolerance limits allow for space-saving storage and good welds with consistent quality at all welding points.

In order to guarantee a high degree of reliability, BR exclusively uses certified raw materials which achieve a minimum required strength standard (MSR) of at least 100 for the production of the fittings. Moreover, all Bänninger fittings are subject to constant quality checks by our internal quality-management system, which is continuously improved.

For the processing of large fittings, Bänninger Kunststoff-Produkte GmbH offers an extensive selection of pipe-system components, starting with flanges of up to 630 mm diameter and ranging through flat gaskets of up to 1,000 mm and on to special flange connections with diameters of up to 560 mm. Our range of accessories is rounded off with an assortment of high-end welding devices for electrofusion socket welding and heating-element butt welding. The welding devices are offered for sale, or they can be conveniently leased, including optional nationwide transport.

Large BR fittings are the solution for a cost-saving, safety-conscious and durable design for pipe systems. The variety of possible applications and additional services, such as the prefabrication of assemblies, a high degree of availability, a wide range of products and accessories as well as optional nationwide transportation to the construction site, ensure the success of your project.

Navigation

All News

Berlin/Dresden/Reiskirchen, April 2022

Now, for the first time, DINplus certified polyethylene (PE) pressure pipes with short-fiber-reinforced PE intermediate layer

Awarding of certificate for...

Read more

Berlin/Dresden/Reiskirchen, April 2022

Erstmals Druckrohre aus Polyethylen (PE) mit kurzfaserverstärkter PE-Zwischenschicht DINplus zertifiziert

Zertifikatsübergabe für Rohre vom Typ BLACKTECplus...

Read more

BLACKTECplus is the result of our many years of intensive research and is based on a wide range of competencies. These include innovative thinking, technical know-how and, very importantly, experience...

Read more

The head of the Federal Chancellery, Prof. Dr. Helge Braun, was able to take an "exciting insight" into the daily challenges of a medium-sized production company to Berlin last Friday. The Federal...

Read more

A practical and inexpensive solution to weld different wall thicknesses of pipe and fittings in DVS-conformity.

Read more

Climate change is affecting all of us.

Bänninger has a responsibility toward future generations and is successively reducing emissions of climate-damaging CO2, in order to reduce the size of the...

Read more

Target of Bänninger at the production of pipes and fittings from various plastic materials the target of Bänninger is a resource sparing manu-facturing.

Read more

The entire value chain of the plastic pipe industry is under great pressure.

Read more

Within the framework of modifications being carried out on the transformer station on the Baenninger compound last December, a 140 metre long stretch of Blacktech pipe was successfully laid. The...

Read more

In the new year as well, we would like to keep you updated on the state of affairs at Bänninger.

In the current situation, our highest priority remains the preservation of health and safety. A large...

Read more